• Mega 2560 R3 Arduino Compatible

If you know Arduino's you know that it is an open sourced hardware device. This means that reference files and designs are freely provided. This means that high quality boards can be made to the exact same parts, quality, functionality, and compatibility as the official released boards. This is one of those boards 100% compatible with the Arduino IDE and built with the same parts and quality.

This board is built to the specifications of the Arduino Mega 2560 R3, which has the following new features:

  • 1.0 pinout: added SDA and SCL pins that are near to the AREF pin and two other new pins placed near to the RESET pin, the IOREF that allow the shields to adapt to the voltage provided from the board. In future, shields will be compatible both with the board that use the AVR, which operate with 5V and with the Arduino Due that operate with 3.3V. The second one is a not connected pin, that is reserved for future purposes.
  • Stronger RESET circuit.
  • Atmega 16U2 replace the 8U2.
Not sure what an Arduino Mega 2560 is?

The Arduino Mega 2560 is a microcontroller board based on the ATmega2560. It has 54 digital input/output pins (of which 15 can be used as PWM outputs), 16 analog inputs, 4 UARTs (hardware serial ports), a 16 MHz crystal oscillator, a USB connection, a power jack, an ICSP header, and a reset button. It contains everything needed to support the microcontroller; simply connect it to a computer with a USB cable or power it with a AC-to-DC adapter or battery to get started. The Mega is compatible with most shields designed for the Arduino Duemilanove or Diecimila.

The Mega2560 differs from all preceding boards in that it does not use the FTDI USB-to-serial driver chip. Instead, it features the ATmega16U2 programmed as a USB-to-serial converter.

Write a review

Note: HTML is not translated!
    Bad           Good

Mega 2560 R3 Arduino Compatible

  • $25.99